|
All Plugins:
| Show 10 Most Recent | Show 50 Most Recent | Show 100 Most Recent | Search Plugins |
| Show Most Popular | Show My PWNED! Plugs | Effects:
| Show All Effects |
| Amplifier | Analyzer | Compressor | DeEsser | Delay | Distortion |
| EQ | FFT | Filter | Gate | Granular | Modulation |
| Multi | Other | Pitch Shifter | Reverb | Spatializer | Instruments:
| Show All Instruments |
| Ambience | Analog | Bass | Beat Slicer | Chip/LoTech | Drum |
| Frequency Modulation | Granular | Other | Phase Distortion | Physical Modeling | Sample Based | |
|
|
A recent forum post by blatanville:
ah, well, just a thought...good luck finding it!
Read More... |
| |
 Simulation of microphone placement. |
| PWNED! By: tgersic, blatanville, MarsHottentot, skinless |
|
| |
 Movements of eight mono inputs inside a eight speaker "cube" :
- the position of the speakers and the distance are fixed
- the movements of the all inputs is controlled excusively by a standard 3D joystick
The following parameters can be controlled :
- distance between each object
- inertia
- chaos (trigged or continuous)
- circle (radius and pulse)
- gravity (top and bottom limits, rate and curve for the bounces)
- automatic 3D trajectory : shape and speed for each axis |
| PWNED! By: kanybelforg, brand0 |
|
| |
 - division of a stereo input in two series of four frequency bands
- dynamic spatial control of each band into eight outputs
- can be used from 4.0 to 8.0 |
|
| |
 ADopplerEn is a classic doppler effect. It combines a pitch shifter and a rotator to reproduce the effect a static listener can hear when a train or a car is moving fast. It is based on two synced LFOs with an adjustable phase difference which can be synced to the host. |
| PWNED! By: atomic_afro, lowerland |
|
| |
 AirTraffic Control displays a simple map of the room you are in. The input channels appear as numbers with one circle around them, and output channels appear as numbers with two circles. All may be moved around.
AirTraffic Control is a Proximity Mixer, a new kind of audio mixer. Think of the outputs as being like ears: the nearer the inputs come, the easier it is to hear them. |
| PWNED! By: MarsHottentot, rebortbst |
|
| |
 airwall is stereo image expand effect. at the newest mixing or mastering, everyone needs stereo imager like a WAVES S1. airwall gives special sounds for your music. and it's free!!
for mastering or mixing, fat chorus, wall of distortion guitar sound, ambience pads, and more immense sound. |
| PWNED! By: rebortbst, brand0 |
|
| |
 Auto-Pan is a VST-plugIn for the automatic adjustment of the panorama position of the signal (where "automatic" means LFO-controlled in this case). The LFO is tempo-synchronized and can be triggered either via the graphical user inface or via note-on events. |
| PWNED! By: blatanville, nathel |
|
| |
 Look ahead stereo ducker. |
|
| |
 Autopan is a basic autopanner with different LFO shapes and panning modes.
|
| PWNED! By: PTV, blatanville, MIDIManNI, rebortbst |
|
| |
 a simple distance filter and doppler effect. |
| PWNED! By: rebortbst |
|
| |
 Basslane is a free audio effect for VST compatible hosts. It's a simple, yet very handy little utility to control the stereo field of lower frequencies in your audio material. Allows you to define the processed frequency range while using several monitoring options, and to tweak how much you want it squeezed .
|
| PWNED! By: blatanville, aymat |
|
| |
 The Binaural Simulator VST is an effect which allows you to position a sound source in any location in a 3D audio environment. Using the eight auditory cues your ears use to recognize direction and distance, this VST realistically simulates binaural audio. It also includes modes for specifically tuned for headphones and speakers, since speakers require cross-talk canceling to reproduce the same isolation headphones have. |
| PWNED! By: blatanville, aymat, Hempstapimp |
|
| |
 A binaural spatializer effect. Needs Pluggo Runtime (free from Cycling 74). |
|
| |
 Binauralizer allows the positioning of an audio source somewhere around the head of the listener, by use of HRTF.
Listening experience needs a headphone to work. |
| PWNED! By: blatanville, Hempstapimp |
|
| |
 P.I. is a dual channel Phase Inverter. It reverses stereo waveform polarity.
Unlike many other phase inverters, BRB-P.I. inverts the negative/positive polarity of both the left and right channels simultaneously - and does so with a crossfading action to eliminate sudden clicks.
This is not intended to be anything fancy. |
| PWNED! By: MarsHottentot, uzargali |
|
| |
 Randypan is a tempo based random pan effect. It randomly pans audio in sync with your host tempo.
You can also set a crossover so only the frequencies above the xover are panned, plus you can attenuate the stereo width of the frequencies below. |
|
| |
 X-OVER outputs in stereo ABOVE the cutoff frequency and outputs in mono BELOW the cutoff frequency. Why the hell would you want to do that? Because your ears are so close together. |
| PWNED! By: blatanville |
|
| |
 bx_solo is a nice little tool that we have designed to get you STARTED with and used to the way we approach the M/S technique - be it for recording-, mixing- or mastering purposes. The "heart" of our M/S tools are our unique SOLO BUTTONS that allow you to actually LISTEN to all components of a stereo mix / stereo signal individually:
L(left channel), R(ight channel), M(ono sum) & S(tereo difference signal) - and all this PHASE CORRECTED (when needed) and mono-ed out on BOTH SPEAKERS of your system. This is very helpful when working in M/S modes (because especially listening to only the S-signal of a stereo mix is not so easy to do with modern DAW stations) and to check your signals / mixes for errors, noises, clicks, whatever...
bx_solo also contains a STEPPED M/S STEREO WIDTH CONTROL, so you can get an impression about what you can actually do with ist. Do try it out on subgroups (makes ROCK GUITAR subgroups jump out of your speakers at about 150% !!!), FX returns, keyboards / samplers, etc. |
| PWNED! By: blatanville |
|
| |
 bx_solo is a tool that Brainworx designed to get you started with, and used to, the way they approach the M/S technique - be it for recording-, mixing- or mastering purposes. The "heart" of their M/S tools are the Solo Buttons that allow you to actually listen to all components of a stereo mix / stereo signal individually:
L(left channel), R(ight channel), M(ono sum) & S(tereo difference signal) - all phase corrected (when needed) and mono-ed out on both speakers of your system. This is helpful when working in M/S modes and to check your signals / mixes for errors, noises, clicks, whatever...
bx_solo also contains a stepped M/S stereo width control, so you can get an impression about what you can actually do with it. |
| PWNED! By: blatanville |
|
| |
 Channel Matrix 2x2 is a plugin which lets you matrix-multiply the signals of two input channels in order to obtain another two signals which will appear at the two output channels. Example uses are mid/side encoding/decoding, mixing stereo to mono, switching channels left for right, boosting or attenuating signals, inverting signal polarity, etc. |
| PWNED! By: blatanville |
|
| |
 A stereo-mono switcher |
| PWNED! By: uzargali |
|
| |
 The Chime Machine effect started life as a spatial enhancer, and then mutated into the comb filtering delay machine it is today. There are four comb filters/delay units inside Chime Machine, and a novel automatic dynamic routing system. As the name suggests, Chime Machine specialises in producing chiming, spatial effects. |
|
| |
 Stereo to mono effect. |
| PWNED! By: pfunk |
|
| |
 Delta phase is a true stereo phase unit.
Each channel of audio is independently processed by its own dedicated phaser.
Channel locking, stereo width control plus full midi recognition gives a world of possibility. |
| PWNED! By: , blatanville |
|
| |
 Band seperated auto panner. Your input signal is split three ways (through a customer filter bank, which you have complete control over). Each channel is then fed through its own independant autopanner. Each autopanner has its own tempo syncable lfo. Full midi recognition gives extra scope for wierdness or subtlty. |
| PWNED! By: , blatanville |
|
| |
"DH Wrapper" is a VST plug-in that processes 5.1 surround sound content and outputs 2 channel binaural signals. The result is, surround sound through headphones. "DH" stands for "Dolby Headphones" as this VST plug-in wraps the functionality of the "DOLBYHPH.DLL" file installed with software DVD players. In fact, even the demo version of WinDVD installs a fully working version of the needed DLL file.
|
|
| |
 Let's assume that you have a stereo track in which an acoustic guitar is the only instrument in the left channel, and a voice is the only signal in the right. If you pan all left, you might intuitively think that the singer will gradually be heard in the left channel. But with typical hardware and software panning solutions, this is not so!
Instead, the singer's voice is merely lowered until it cannot be heard at all. You may find yourself with a stereo track in which you want to hear all of the instruments or sounds, but simply want to change the entire track's relative stereo position.
Returning to the above example, if you use Fondleo to pan all left, the singer's voice will gradually blend into the left as it is faded out from the right. The end result: your entire stereo track ends in the left channel-- guitar and voice. |
|
| |
 This free VST plugin will take any track and turn it inside out, making it sound as if the audio surrounds you. Turn to freeOutisder when you want to create a sound that fills the room and seems as though it comes from the air all around rather than from the speakers.
Features:
64-bit internal processing resolution.
Built in presets to get your mix jumpstarted.
Full automation support of all controls for VST compliant hosts (additional extensions for REAPER).
Sample accurate, zero-latency algorithm.
Reverses phase on one side of the stereo spectrum.
Pan between the normal and reverse phase channels.
Creates an unusual hyper-stereo effect.
Handles mono-to-mono and stereo-to-stereo I/O from your DAW. |
| PWNED! By: blatanville, rebortbst |
|
| |
We use our HDPHX plugin routinely when mixing with headphones. It takes advantage of the Haas Effect to provide a delayed and attenuated cross-channel mix in each ear to present the sound that would be heard with a stereo speaker system with speakers placed at +/-30 degrees azimuth from front-center.
The plug-in has no user interface. It simply plugs into your stereo audio output channel, and provides the same high-quality 64-bit computing that our other plug-ins feature. |
| PWNED! By: arke, blatanville, West, Moseph |
|
| |
 With this you can let the music fly around you... |
| PWNED! By: Moseph |
|
| |
 kILL-O-RAMA is designed to be used as an insert effect. It's large X-Y pad allows you to concurrently set pan and volume for a channel. It also features a tempo-synced LFO to facilitate auto-panning. Using just the volume slider, it can also be used to increase or reduce the gain of a channel on those occasions when you would otherwise need to turn all your other channels up or down. |
| PWNED! By: blatanville |
|
| |
 Kn0ck0ut is a free VST plugin that takes two mono inputs and
spectrally subtracts one from the other. It can also retrieve
centre-panned material from stereo input. |
| PWNED! By: blatanville |
|
| |
 Minimalistic 5.1 Surround Module:
- stereo input with separate position for the two voices
- global gain setting according to distance
- separate level setting for the center channel
- separate level setting for the LFE channel (not modified by the source position)
Applications : replacement of the 5.1 module in Cubase SX and Nuendo (true stereo), provides surround mixing to EnergyXT, Podium, Reaper and Tracktion... |
| PWNED! By: blatanville |
|
| |
 mgPhaseShifter simply shifts the left or right audio channel. It can be used on mono channels to give a 'pseudo stereo' effect. |
| PWNED! By: blatanville |
|
| |
 3D position controller effect. |
|
| |
 a stereo plug-in which treats each channel as a separate monaural source. Each channel may then have its volume attenuated, its position in the stereo field panned, and its sonic character altered with a resonant lowor high-pass filter if you so choose. Moneo is equally comfortable with basic functionality (forcing mono) or inventive destruction of a source's original spatial and spectral identity! |
|
| |
 MrDonald is a virtual rotary speaker. It simulates the famous Leslie Speaker.
Adjustable tone, acceleration, minimum and maximum speed for both the bass and the treble speakers, adjustable stereo width and balance between bass and treble. Midi control. |
| PWNED! By: blatanville, robojam, MarsHottentot, Hempstapimp |
|
| |
 This is a bunch of "tools" (seems like I have a predilection for bundles...) intended to process stereo streams but focusing on middle and side instead of left and right.
The idea is *really* simple but the effects can be subtle and powerful.
::msEncode and msDecode::
These to ones are just converters mapping M -> L and S -> R so that you can put your own effects between the coder and the decoder. The effects below are just some hard-coded ones.
::msComp::
This one uses the same compression algorithm as my "classic" compressor, but focus on the Middle signal without touching at the Side. A typical use of this effect is to boost a mix without touching at the stereo image.
::msBalance::
2 separate gains for the Middle and side signals.
::msSwap::
it just swap the Middle and Side. You can use it before msComp if you want to compress the side instead of the Middle.
::msDelay::
This is a simplified version of analog delay that you can use to delay either the middle or the side.
|
| PWNED! By: blatanville, shamanix |
|
| |
 MSED is a mid/side encoder/decoder plug-in which encodes (splits) the incoming stereo signal into two components: mid/side or, alternatively, mono/stereo pair, and vice versa: decodes mid/side signal pair into stereo signal. MSED is also able to work in the in-line mode with the ability to adjust mid and side channels' gain without the need of inserting two MSED plug-ins in sequence. |
| PWNED! By: Moseph, shamanix |
|
| |
 Mixing and spatial reduction :
- twenty four inputs to two outputs
- distance simulation (high frequencies damping, reverberation)
- panorama with adjustable widness
Applications : it corresponds to the spatializer section of the former plugins, and allows to use most of the multichannel Acousmodules in a stereo environement. |
| PWNED! By: blatanville, kickdrummer58 |
|
| |
 Simple tremolo/auto-panner plugin, allows for tempo-sync, and syncing the oscillator's phase to bar starts. |
| PWNED! By: PTV, blatanville, Moseph, rebortbst |
|
| |
 Auto Tremolo |
|
| |
 center-channel remover |
| PWNED! By: baraguna |
|
| |
 JB OmniSone is a free VST effect plugin to increase the panning range. A sound source can be panned both within and outside the loudspeaker base. |
| PWNED! By: blatanville |
|
| |
 Orbit are very strange autopanners:
-gravity is the oddo autopanner.
-satellite is an autopanner like a satellite. L input goes into orbit of the R input. Besides. If nothing sounds in L input, satellite changes to center moving autopanner.
-opposite is a simple one in orbits.
when the L input on R100%, the R input will moves to L 100%
|
| PWNED! By: blatanville |
|
| |
 The idea behind this plugin is to have a panner you can use in any DAW you wish that is very configurable by the user without any special magic inside that leaves you wondering what happened to your audio. In other words, you have complete control of what the plugin is doing.
PAEIN is based on the Max/MSP programming environment. To use PAEIN, you need to install the Cycling74 Pluggo runtime library. |
|
| |
 For narrowing a stereo signal with one slider.
Locked pan sliders.
Seperate volumes.
Master pan and volume.
Five presets.
Bypass and invert. |
| PWNED! By: blatanville |
|
| |
 MM FX 05 PANFILTER is a VST effect. Each Channel of the incoming signal is filtered with 3 bandpass filters with adjustable offset and then goes to an autopanner. The filter has joystick control for frequency and resonance and is modulated by a syncable LFO. The LFO goes to audiorate when controlled manually, so it is possible to do filter FM as well.
The sonic results of this FX vary from subtle widening of pads and adding some "air" to extremely weird FM and modulated sound, depending on the input source and the parameters. |
| PWNED! By: blatanville |
|
| |
 16 stages stereo phase shifter (knows as PHASER.)
Classic, Free, Efficient.
2 x LFOs :
BPM/Hz : set the speed (0.01 to 480), click on label to select Hz or BPM mode,
DEPTH : set the FRQ amplitude modulation.
PHASE SHIFTER :
MODE :5 modes (click on label to change mode)
STAGES : allow 4, 8, 12 or 16 cells.
LPF/HPF : pre-filtering the signal sent to the phase-shifter.
HZ/REF (frequency) : select the frequency where the scan start.
WIDE : enlarge the stereo field by dephasing L & R
SAND : add noise.
FDBCK (feedback) : re-inject the processed signal to the filter network.
TRACK : Allow to drive frequency by the audio input.
LEVEL : amount :)
FRQ : pre-filter Hz (you can listen processed signal by selecting TRACK : MON) |
| PWNED! By: blatanville |
|
| |
 Prodyspace is a new kind of 4d-Panner which has been designed to put Instruments within a mix to the front or to the back. To achieve this effect, the Prodyspace uses delay-modulation (kind of spatial processing), intelligent filtering and very short reverberation (FDN).
|
|
| |
 Simple control of stereo panorama. |
| PWNED! By: blatanville |
|
| |
 Simple control of panning a mono sound to stereo. |
| PWNED! By: blatanville |
|
| |
 Inverts the phase of either left or right channel. |
| PWNED! By: blatanville |
|
| |
 An autopan made for really slow sweeps with an inbuilt stereo contractor to control how width of the sweep. |
| PWNED! By: blatanville |
|
| |
 Instead of expanding a stereo panorama it contracts it, Eg. to make things sound further away (if combined with a lowering of the volume). |
|
| |
 Creates cool melodic patterns if a stereo track with melodies has one channel reversed.
If used on regular mono or stereo tracks with none or little stereo separation there will be a pretty small effect. |
| PWNED! By: blatanville |
|
| |
 The Starplugs RuntimePanner can adjust the panorama position of the incomming signal using runtime differences between the first wavefronts. The result of this panning tool is very close to the panning effect when using an A-B stereo microphone configuration and is very usefull for panning accoustic signals like guitars and voices. Pan your tracks without level differences between left and right channel. |
|
| |
 Positions of eight inputs inside a "cube" :
- eight inputs to eight outputsdans un dispositif cubique
- the position of the speakers is fixed
- distance settings for each input / speaker (64 values)
- the positions and the movements of the eight inputs (one by one) are exclusively made with a standard joystick
- the vertical dimension can be set to the rotating handle or the lever
Compatible with all 2D and 3D joystick which has eight buttons.
Applications :
- static positions of monophoniques inputs (instruments...)
- recording of the movements automation for each channel |
|
| |
 Controls the spatial position of the two inputs according to the intensity and the base frequency of the sound.
Possibility to use an external sound file with the integrated wave player, or the audio input itself. |
|
| |
 - eight inputs to eight outputs
It processes the positions of the eight audio inputs as a group which can be globally controlled :
- the horizontal and vertical distance (on the graphic) between each point (length of the line)
- the global direction of the line
- the radius and the angle of rotation
- the global position of the groupe
It is of course possible to control and automate each eight positions separately
Applications : change of the spatial arrangement of the channels inside an octophonic audio file,
easy internal animation etc. |
|
| |
 Spatial masses control of two inputs to thirty-two outputs :
- mono or stereo input
- four levels of 8 speakers, free position
- separate and global settings of the spatial area for each channel and each level
- ten amplitude curves, independant for each level
- display of the percentage level values for each channel for precise area control |
|
| |
 Grouped control of one, two, four or six inputs to sixteen outputs (2D) :
- center : X/Y position of the six inputs together
- alignement : distance and orientation of the six inputs
- angle / radius : size of the circle and rotation
- manual individual positions |
|
| |
 Multiple inputs 6.0 Surround Module :
- six inputs to six outputs
- free arrangement of the speakers
- separate or grouped spatial position of the six inputs
- three XY controllers for easy setting and moving of the grouped channels : position, alignement, scale and rotation
- spatial area setting for each channel plus a global setting
- ten intensity curves
- fonctionning in 5.0 ou 6.0 mode (ITU-SMPTE standard)
Applications : dynamic modification of the spatial arrangement of a surround sound, complexe movements with six mono sounds, surround panning of the separate outputs of an instrument... |
|
| |
 5.1 Surround Module :
- stereo input with separate position for the two voices
- global gain setting and view of the intensity values for all outputs
- ten intensity curves
- right and left linking option with X, Y shift and mirror
- separate level and curve settings for the center channel
- separate level setting for the LFE channel (not modified by the source position)
- test signal generator
Applications : replacement of the 5.1 module in Cubase SX and Nuendo (true stereo), provides surround mixing to EnergyXT, Podium, Reaper and Tracktion... |
| PWNED! By: blatanville |
|
| |
 Module "surround" twelve discrete channels :
- control of the positions and motions of two inputs to four to twelve outputs
- free positionning of up to twelve speakers
- spatial area setting available for each speaker, plus a global setting
- ten amplitude curves
- the left and right inputs can be controlled and automated separately
- realtime control of the X/Y shift and mirrors between the two inputs
- support of standard Joysticks and GamePads for controlling the sound position
- the distance between the left and right inputs can be controlled by the rotating handle of a 3D Joystick
- MIDI Learn function for all parameters
- automatable Mute fonction for each output
- display of the percentage level value for each channel for precise control |
| PWNED! By: MIDIManNI |
|
| |
 Extension and simplification of the previous one with sixteen outputs (2D) :
- 0 to 100 grid coordinates for use within Podium editor
- support of an analog GamePad for direct control of the position of the two inputs
- level setting common for the two inputs
- the 512 version has five inputs...
- the two versions are in the archive |
|
| |
 Extension and simplification of the previous one with sixteen outputs (2D) :
- 0 to 100 grid coordinates for use within Podium editor
- support of an analog GamePad for direct control of the position of the two inputs
- level setting common for the two inputs
- the 512 version has five inputs...
- the two versions are in the archive |
|
| |
 Surround module for cinetic movements :
- two inputs to eighteen outputs
- fix arrangement of speakers in the 17.1 standard format
- 3D perspective view
- individual mute for each channel
- spatial areas settings available for each channel plus a global factor setting
- control of the position of two inputs with a combination of an analog GamePad and MIDI controllers
- X, Y, Z shift of the right input settings to allow movements with constant "stereo separation" |
|
| |
 7.1 Surround Module :
- free positionning of the seven channels / speakers
- stereo input with separate position control of the two voices
- linking of the right channel to the left, with X, Y shift and mirror
- separate area settings for each speaker plus a global setting
- ten intensity curves
- separate level and filter frequency cutoff setting for the LFE channel
- MIDI Learn fonction
Applications : replacement of the 7.1 module of Nuendo, provides 7.1 mixing to EnergyXT, Podium, Reaper and Tracktion... |
|
| |
 The Sanford Bass Tightener is a spatial effect for tightening up the stereo spread. It allows you to set the frequencies below a certain specified frequency to mono, for example 120Hz, while allowing the higher frequencies to remain in stereo. This can help during mixing/mastering by keeping the the bass tight and centered and the higher range nice and wide.
Key Features
Low CPU usage
Four filter slopes
Four output modes
Adjustable bass amplitude
Adjustable stereo spread |
| PWNED! By: blatanville, pattonfreak1, shamanix |
|
| |
 SHEPPi (Stereo Haas Effect Ping Pong Inverter) is a stereo image enhancement tool modeled after the K-Stereo Ambience Processor by Algorithmix. SHEPPi imparts a subtle, natural sense of space thanks to a combination of EQ'able synthetic early reflections, M-S widening and inverted stereo delay feedback.
This plug-in has been enhanced for both track insert as well as aux send applications, making it an excellent tool for both mastering and stereoizing purposes.
|
| PWNED! By: blatanville, West, besanane, BroderYon |
|
| |
 M/S Processor - Free version of the "Central Station" plugin |
|
| |
 A tool to manipulate stereo base
Mid and side signal can be mixed individually
to widen or narrow the
stereo base of your audio
Works with MS routines instead of
modulated delays, so there are
no artefacts |
| PWNED! By: rebortbst |
|
| |
 Rotates audio in virtual chamber, ie. panning, depth reverb. lots of modulations for complex movement. |
|
| |
 Stereo Enhancher is a vst effect that can widen a sound. It does this by delaying one of the channels by up to 50ms. It can also invert the phase of each channel. |
| PWNED! By: blatanville, rebortbst |
|
| |
 Stereo Tool offers controls and visual feedback for the stereo stage. It features ultra precise controls of input gain and individual pan for left and right channels. A phase inverter is available for each channel. A global stereo pan and a stereo width setting are also implemented to complete the management of the stereo signal.
Stereo Tool also offers an accurate visual feedback reflecting the signal content. A vector scope display, Peak meters for both inputs and outputs, and a phase correlation meter permanently monitor the signal.
As all Flux:: plug-ins it features 64-bit floating point processing, up to 8 FS (384 KHz). |
| PWNED! By: tgersic, blatanville, West, shamanix |
|
| |
 This plug-in can be used to add stereo width to audio tracks. This plug-in is most effective on mono pad sounds and alike. This effect works with mono stream generating stereo stream. It also works with stereo streams, however both channels get processed independently of each other like they are mono streams and then two resulting stereo streams get mixed together to produce one stereo stream. |
| PWNED! By: atomic_afro |
|
| |
 Stereo-Enhancer is a VST-plugIn for the PC-platform for the modification of stereo-width of a signal. The adjustment can be made for low, mid and high frequencies seperately. The separation of the frequency-bands is achieved by means of linear-phase FIR-filters. This is, because the sum of the three filtered (not yet modified) signals should sum up exactly to the original signal. |
|
| |
 StereoBand is a stereo expander that splits the signal into 8 bands, and for each band's left / right signal you can set a delay that 'widens' the signal. You can also set the pan position of each band.
If you have problems, find any bugs or have any ideas for improvements then send us a message |
| PWNED! By: atomic_afro |
|
| |
 The very first Quasi Stereo algorithm available as a free VST plugin |
|
| |
 This stereoizer is different than most others. I modelled it after an old hardware-synth that I have. Its nothing fancy but its efficient. It works by adding a phase-inverted, slightly delayed, discrete chorus to the dry signal. Unlike a typical chorus effect, which tends to turn a solo-instrument into an ensemble sound, this stereoizer is more transparant. Its also not a typical "delay" effect, or a "surrounder" which isn't really mono-compatible.
Its mono-compatible: If you monoize the sound again (left channel + right channel) the added effect will dissapear completely, leaving only the original sound. This has the benefit that you can use it on basses, even kick-drums, as well as any other sound. People who listen to your music in mono will not hear the stereoizer at all ! Stereoized bass-sounds won't sound sloppy on sound-systems where there are only one loudspeaker (sub-woofer) for the bass. |
|
| |
 An insert effect to create a stereo signal from a mono input by modulating
delay time, frequency and amplitude of the incoming signal
Combines delay modulation and MS routines
to create natural sounding stereo effects
It can also be used as a chorus/flanger/phaser or
to modify the signal beyond recognition if pushed to the extremes
Very useful for doubling vocals or synthies
or to manipulate the stereo base of incoming audio
Dual mode modulates both input channels separately |
|
| |
 Adjust the position of percussion sounds in a stereo loop, or add stereo positioning to mono samples, placing frequencies exaclty where you want them. Stereoplacer gives you control that is simply not available with a traditional mix setup.
Stereoplacer is a fine-tune parametric EQ with the addition of stereo positioning controls. This allows you to tune each band into specific frequencies and move the frequency content around in the stereo sound stage. You can also apply different amounts of cut and boost to the Left and Right channels, or allow Stereoplacer to keep the balance of the original sounds while you choose the position.
|
|
| |
 Have you ever loaded up a sample library and discovered that the "stereo" samples are not really stereo? Classic examples are:
* Upright bass with microphone on the left, piezo pickup on the right
* Bass drum with one microphone panned left, a very different one panned right
You'll know the drill: split the track into two mono tracks, process each one separately.
Have you ever needed to tame a track where the panning was just a bit too radical? The same drill.
These tracks aren't stereo, they're steroid!
And you need a bouncer to knock them into shape.
Steroid Bouncer will save you heaps of effort in most of these situations. It gives you independent mixing, panning, EQ and (delicious) overdrive control over each channel of a "stereo" track. |
| PWNED! By: atomic_afro |
|
| |
 This plug-in is designed for use in Cubase and Nuendo. It simulates the bass management systems found on most dolby digital and dts surround sound receivers. This allows surround sound engineers to hear what their 5.1 surround mix sounds like without having to burn a CDr or DVDr and then play it through a consumer 5.1 surround receiver. |
|
| |
 Auto-pan effect. |
|
| |
 A VST-Plugin, which simulates pseudo surround sound with 4 Speakers.
(Left speaker in front left, Right Speaker in front right, Left speaker behind RIGHT and right speaker behind LEFT)
Btw. it has a nice UI ;-) |
|
| |
 A FREE stereo enhancer.
* Loudness control enables a complex saturator to boost your mixes.
* Stereo width slider going from mono to wide, bringing the stereo image out and towards the listener.
* Subtle Air & Bass boosters to lift and help the audio 'breath'.
* Very low CPU usage.
* FREE!
UpStereo is a simple, useful tool - it makes your mixes bigger, in stereo width and loudness.
Using three basic basic systems:
1. A fixed frequency EQ designed to lift the highest audio frequencies, and boost the bass.
2. A stereo width unit, for expanding stereo sounds so they appear wider and fatter. At extreme levels other characteristics are also brought out of the sound, so this can also be used as a tonal control for individual instruments. This also has a mono setting, useful for squashing up those aggressive samples that take over the mix.
3. A loudness button that raises the waveform to the limits in a smooth curve. This saturation gives the mix a more perceived loudness, without clipping.
These stages create an overall loudness effect on the final output, so a gain control is included to keep the limits in check.
The main 'bubble' display on the plug-in is really a basic meter, when one of the stereo halves flash white, then the output is in danger of being clipped. Try and keep the levels so the white flashes only occasionally, this enables the loudness saturator to work at it's best. |
| PWNED! By: blatanville, West |
|
| |
 WideBug - a simple tool to enhance the stereo sound of your audio material. |
| PWNED! By: blatanville, pattonfreak1 |
|
